Item group

Radial rotary shaft seal up to 35 mm, DIN 3760

Properties:

Radial rotary shaft seals serve to seal rotating machine components. The mainly consist of a rubber part with a reinforcement plate and a worm spring made of spring steel. Depending on the intended use, there are three basic types: the standard construction forms A, B and C.

Materials:

NBR (72 Shore A)

Temperature range:

-30°C to +100°C

Running speed:

Max. 14 m/s

Optional:

Material FKM (-20°C to +200°C, running speed max. 37 m/s) -V

Designs:

A (commonly used market designations: BA, (TR)A, CB, 827N, DG, SC, WA) /

AS (commonly used market designations: BA SL, (TR)E, CC, 827S, DGS, TC, WAS):

The rubber-elastic external jacket can bridge the gap between thermal expansion and a high degree of roughness in the housing hole. There is no frictional corrosion. Changing the seal frequently prevents damage to the housing hole. Is suited for sealing gaseous or low-viscosity media. The design AS is provided with additional dust lip to safeguard against dirt and corrosion.

B (commonly used market designations: B1, (TR)C, BB, 822N, DF, SB, WB) /

BS (commonly used market designations: B1 SL, (TR)D, BC, 822S, DFS, TB, WBS):

Metallic housing, press in slightly during installation. Requires narrower tolerances of the housing hole, to ensure a seal even at the outer casing. BS design with an additional dust lip against dirt and risk of corrosion.

C (commonly used market designations: B2, (TR)B, DB, 824N, DFK, SA, WC) /

CS (commonly used market designations: B2 SL, (TR)F, DC, 824S, DFSK, TA, WCS):

Metallic housing with reinforcing cap. Sealing and assembly as design B. Used in preference in harsh operating conditions and for larger dimensions. Is less sensitive to assembly errors due to the reinforcing cap. CS design with additional dust lip against dirt and risk of corrosion.

AD / BD:

The designs AD or BD with two sealing lips are used to seal and separate two media.

AO / BO:

The designs AO and BO are designed without the garter springs. They are designed only for minor seal cases.
More information Less information

Filter items

Version
Please select
size
Please select
Pipe diameter (outer) [mm]
Please select
H [mm]
Please select
more filters
Radial rotary shaft seal up to 35 mm, DIN 3760:
20 of 1372 articles
from €1.1307
Immediately available
from €1.487
Immediately available
from €1.0371
Immediately available
from €1.1307
Immediately available
from €1.8743
Immediately available
from €1.0371
Immediately available
from €1.1307
Immediately available
from €1.362
Immediately available
from €1.5994
Immediately available
from €1.7118
Immediately available
from €1.2371
Immediately available
from €1.487
Immediately available
from €1.7118
Immediately available
from €2.3078
Immediately available
from €1.1372
Immediately available
from €1.1372
Immediately available
from €1.0371
Immediately available
from €1.2371
Immediately available
from €1.5994
Immediately available
from €1.0371
Immediately available
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.